Connectivity

Product Innovations

Klippon® Connect Terminal Blocks

Klippon® Connect high current terminal blocks

Klippon® Connect high current terminal blocks

The new A2C 50/70 and A2C 95/120 versions are suitable for cross-sections from 10 to 120 mm² and feature the innovative PUSH IN-Power connection technology. This means you can use a single convenient connection system for the entire cross-section range and have consistent access to the wide range of accessories of the Klippon® Connect A series.

GO TO PRODUCT CATALOGUE To Product

Klippon® Connect TTB Range for instrument transformer wiring

Klippon® Connect TTB Range for instrument transformer wiring

In T&D applications, current and voltage transformers are mainly used for protection and measurement functions. Our new TTB range of Klippon® Connect transformer terminal blocks have been designed to meet all the connection requirements of these two critical applications.

GO TO PRODUCT CATALOGUE TO PRODUCT

Klippon® Connect AITB terminal blocks for building installation wiring

Klippon® Connect AITB terminal blocks for building installation wiring

Our new AITB modular terminal block system was specially developed to meet the specific requirements and safety regulations for wiring in building installations. Special features of the series ensure real added value in planning, installation and operation on site.

GO TO PRODUCT CATALOGUE TO PRODUCT

Klippon® Connect sub-distribution block WPD 110

Klippon® Connect sub-distribution block WPD 110

Sub-distribution and locolised systems can be found not only in the building industry, but also in other industries such as mashinery. As the name suggests, the respective lines in different cross-sections must be collected and distributed within these switchgear.

GO TO PRODUCT CATALOGUE TO PRODUCT

Klippon® Connect HV terminals in M8 and M10 with high partition and end plates

Klippon® Connect HV terminals in M8 and M10 with high partition and end plates

The efficient and reliable distribution of electrical power in a challenging environment requires interface solutions that are optimally designed for the special characteristics of a particular application.

GO TO PRODUCT CATALOGUE TO PRODUCT

Klippon® Connect potential distribution blocks WPD 111 and WPD 113

Klippon® Connect potential distribution blocks WPD 111 and WPD 113

WPD distribution blocks have a unique echelon form and screw heads in an offset position. The latter ensure at every echelon level a safe and comfortable connection in systems and housings, even in confined spaces.

GO TO PRODUCT CATALOGUE TO PRODUCT

Klippon® Connect A2T 2.5 DT/DT test-disconnect terminal blocks

Klippon® Connect A2T 2.5 DT/DT test-disconnect terminal blocks

Our A2T 2.5 DT/DT test-disconnect terminal blocks enable a safe and simple electrical isolation in confined spaces.

GO TO PRODUCT CATALOGUE TO PRODUCT

Klippon® Connect AWPD-Potential distribution terminal blocks

Klippon® Connect AWPD-Potential distribution terminal blocks

Power distribution one step ahead
Klippon® Connect combines clamping yoke and PUSH IN technology

GO TO PRODUCT CATALOGUE To Product

Klippon® Connect A2T 2.5 EM terminal blocks with electronic components

Klippon® Connect A2T 2.5 EM terminal blocks with electronic components

In industrial control panels, the smallest electronic components often have to be integrated to protect sensitive electronics, to connect components, to visualise operating states, and much more. Furthermore, maximum flexibility is required for the individual design of circuits.

GO TO PRODUCT CATALOGUE TO PRODUCT

OMNIMATE® PCB terminals and connectors

OMNIMATE® 4.0

OMNIMATE® 4.0

Configurable connector portfolio with fast and safe SNAP IN connection technology.
The modular slice concept allows different hybrid combinations out of signal, data and power in one.

Go to product catalogue To product

OMNIMATE® Power BVDF 7.62HP

OMNIMATE® Power BVDF 7.62HP

OMNIMATE® Power BVDF bus connectors have two connections per pole and a time-saving 6 mm² PUSH IN connection. This innovative feature allows easy connection of multiple devices during installation.

GO TO PRODUCT CATALOGUE To product

OMNIMATE® Board-to-Board solutions

OMNIMATE® Board-to-Board solutions

Flexible engineering of compact devices.
OMNIMATE® board-to-board connectors feature a 1.27 mm pitch and offer maximum flexibility due to different designs.

Go to product catalogue To Product

Heavy duty connectors

RockStar® ModuPlug with extended range of modules

RockStar® ModuPlug with extended range of modules

With the expanded range of modular inserts, even more combination options can now be realised for specific applications. This is ensured by suitable modules for a wide range of voltages and currents as well as two additional installation widths.

Go to product catalogue To product

Enclosure systems and components

High-size fully certified enclosure for IND and HAZ areas

High-size fully certified enclosure for IND and HAZ areas Product innovation

Whether indoors or outdoors: To ensure installation components function reliably over the long term in harsh environments, they must be optimally protected from environmental influences. Our high-size enclosures meet the most stringent requirements and are well thought out down to the last detail.

GO TO PRODUCT CATALOGUE to product

Cable Entry Systems

Cabtite cable entry plates for space-saving installation

Cabtite cable entry plates for space-saving installation Product innovation

If multilple hoses or cables are to be fed into control cabinets or enclosures, cable entry plates are the best choice. They seal, minimise tensile stress, save space, and are an economical alternative to conventional cable glands.

go to catalog to product

Circular connectors

M12 connectors with PUSH IN connection

M12 connectors with PUSH IN connection

M12 connectors with PUSH IN connection make cable assemblies particularly quick and easy.
Stripped conductors with or without ferrules are simply plugged in and a reliable connection is established.

Go to product catalogue To product